Suitable harvester heads: H5, H6, H7
Cranes: C4, C5, C44+

The efficient Mercedes-Benz engine and the dual circuit hydraulic system ensure that Ergo’s performance in its size class is unbeatable – it is a real power pack at all sites. The cabin ergonomics, the service-friendly and sturdy structure of the machine, and the best customer support on the market ensure that PONSSE Ergo has productive working hours – year after year.

The patented active front axle suspension system make the ergonomics of the Ergo top-rate. The system keeps the cab upright on uneven terrain and, with its lowered centre of gravity, eliminates the discomfort caused to the operator by swaying from side to side better than any other system.

PONSSE Ergo has the powerful features of a large machine, but its agility, low base weight and active suspension system, which evenly spreads its ground pressure, make it suitable for the most fragile terrain and thinning sites. Because it can be equipped with different cutting heads, cranes,  tires,  cloride filling and other options, the Ergo can be adapted to suit the most varied conditions according to the end user's needs.


Technical details - PONSSE Ergo

Minimum weight
18 500 kg (37 920 lbs)
Typical weight
20 100 kg (43 652 lbs)
7 800 mm (307 in)
2 670–3 090 mm (105.1-121.7 in)
Ground clearance
600 mm (23.6 in)
Transportation height
3 800 mm (150.5 in)
C4 C44+ C5
Slewing torque (gross)
43 kNm PONSSE Beaver 40 kNm, PONSSE Fox 52 kNm, PONSSE Ergo 43 or 57 kNm 57 kNm
Tilt angle
30 degrees 12 degrees/+18 degrees or ±20 degrees 20°
Crane turning angle
250 degrees 250 degrees 250°
Lifting torque (gross)
228 kNm PONSSE Beaver 240 kNm, PONSSE Fox 230 kNm or PONSSE Ergo 250 kNm 250 kNm
10 m PONSSE Fox: 32.8-36 ft (10-11 m) (H5, H6), PONSSE Beaver: 32.8-36 ft (10-11 m) (H5, H6), PONSSE Ergo: 32.8-36 ft (10-11 m) (H5, H6, H7) 10 m
MB OM926 LA EU Stage IIIB, MB OM906 LA EU Stage IIIA
3B: 210 kW (286 hp), 3A: 205 kW (275 hp)
3B: 1 120 Nm, 3A: 1 100 Nm / 1 200-1 500 rpm
Tractive force
160 kN (35 969 lbf)
Fuel tank volume
400 l (88 gal UK)
Hydraulic system
Control system
PONSSE OptiControl
Hydraulic circuits
Separate hydraulics circuits for the harvester head and crane
Harvester head pump
190 cm3 (11.6 cu in)
Crane pump
145 cm3 (8.8 cu in)
Oil tank volume
350 l (77 gal UK)
600/65-, 710/55-34''
600/55-, 710/45-, 800/40-26,5''
Harvester head
H5 H6 H7 H7euca
Weight from (depending on the equipment)
from 1 984 lbs excl. rotator (900 kg excl. rotator) from 2,315 lbs excl. rotator (1,050 kg excl. rotator) from 2,535 lbs excl. rotator (1,150 kg excl. rotator) 2,646 lbs excl. rotator (1,200 kg excl. rotator)
Feed system
3 feed rollers 3 rollers 3 rollers 3 feed rollers
Feed force
4,271 lbf (19 kN) 5,620 lbf (25 kN) 6,744 lbs (30 kN) 25-30 kN
Maximum opening
20.8 in (530 mm) 23.6 in (600 mm) 25.6 in (650 mm) 25 in (630 mm)
Feeding speed
20 ft/s (6 m/s) 20 ft/s (6 m/s) 16 ft/s (5 m/s) 19.7 ft/s (6 m/s )

Plenty of optional equipment is available in addition to the comprehensive PONSSE Ergo standard equipment. Consult your nearest Ponsse Service Center or dealer for more information on the standard and optional equipment.