The language of the website has been recognised automatically.
  • harvester-heads-header

PONSSE H7

This content requires HTML5 & Javascript or Adobe Flash Player Version 9 or higher.

Base machines: PONSSE Bear, PONSSE Ergo, PONSSE Ergo 8w, PONSSE ScorpionKing or track-based machines weighing over 20 tons

The PONSSE H7 is a supremely compact, robust and powerful harvester head for demanding work at final felling sites. The small outer dimensions, powerful feed and excellent power-to-weight ratio guarantee productivity in both softwood and hardwood harvesting. Accurate automatic control ensures good cutting precision and the wood is always fed at maximum speed to the right length. The controlled feed acceleration and deceleration also reduce feed damage and pressure peaks, and increase the machine’s efficiency. 

The grip pressure of the delimbing knives and feed rollers adjusts freely according to the trunk’s size, and the feed rollers support the wood from below. This ensures minimal friction and a solid grip on the wood during feeding.

The PONSSE H7 also has excellent sawing efficiency. The easy-to-use automatic features control the saw motion according to the tree diameter, and guarantee fast cutting. While the features increase sawing efficiency, they also increase the service life of the saw blade and the chain. The strong and smooth tilt motion speeds up work while reducing the stress placed on the harvester head.

The H7 harvester head is also very well suited for multistemming. The geometry of the rollers and delimbing knives is also ample enough to allow for the collection and bucking of larger trunks, meaning that the H7 harvester head is capable of multi-stemming log-size trunks.

Close

Technical details - PONSSE H7

Dimensions
Weight from (depending on the equipment)
1,150 kg (2,535 lbs) excl. rotator
Length
1,500 mm (59 in)
Width
1,540 mm (61 in)
Height without rotator
1,680 mm (66 in)
Feed roller
Feed system
3 rollers
Feed force
30 kN (6,744 lbs)
Feeding speed
5 m/s (16.4 ft/s)
Maximum opening
650 mm (25.6 in)
Declimbing unit
Number of knives
4+1+1
Maximum opening of front knives
640 mm (25.2 in)
Maximum opening of rear knives
750 mm (30 in)
Delimbing knives and feed rollers are separately controlled
Yes
Tracked carrier
Operating pressure
28 MPa (4,061 psi)
Carrier weight (min)
20-22 tons
Measuring and control automatics
Measuring device
PONSSE Opti4G
Equipment
Equipment

Plenty of optional equipment is available in addition to the comprehensive PONSSE H7 standard equipment. Consult your nearest Ponsse Service Center or dealer for more information on the standard and optional equipment.