The language of the website has been recognised automatically.
  • harvester-heads-header

PONSSE H5

This content requires HTML5 & Javascript or Adobe Flash Player Version 9 or higher.

Base machines: PONSSE Beaver, PONSSE FoxPONSSE Scorpion, PONSSE ScorpionKing or track-based machine over 10 tons

The PONSSE H5 harvester head brings the productivity of thinning to a completely new level. Working is fast and smooth and the design pays special attention to multi-stemming, in particular. Combined with a structure that facilitates easy maintenance, H5 truly meets the new requirements set by loggers.

The PONSSE H5 harvester head is a general harvester head especially suited for efficient thinning. Its design pays special attention to smooth multi-stemming. The large opening, long front delimbing knives and the correctly placed wide top feed roller intensify thinning of single trees as well as collecting trunks during multi-stemming. The extremely fast yet economical feed and cutting guarantee high productivity under all operating conditions.

Multi-stemming is performed efficiently with the PONSSE H5 harvester head without the need of optional equipment, which would only increase the weight as well as the need for maintenance. This way the crane capacity and reach, and the stability of the base machine, can be utilised fully to the most relevant function – the handling of trees. Multistemming is based on the automatic operating logic of the delimbing knives and feed rollers, which enables grabbing a new trunk with the delimbing knives while the feed rollers hold the trunks in place in the harvester head. Multi-stemming considerably speeds up harvesting without deteriorating the harvester head’s ability to handle single trunks.

Close

Technical details - PONSSE H5

Dimensions
Weight from (depending on the equipment)
from 1 984 lbs excl. rotator (900 kg excl. rotator)
Length
52.5 in (1 335 mm)
Width
48.8 in (1 240 mm)
Height without rotator
53.1 in (1 350 mm)
Power consumption
80–100 kW
Operating pressure
28 MPa
Rotator
Indexator AV12 / AV14 /H132
Feed roller
Feed system
3 feed rollers
Feed force
4,271 lbf (19 kN)
Feeding speed
20 ft/s (6 m/s)
Maximum opening
20.8 in (530 mm)
Declimbing unit
Number of knives
4+1
Maximum opening of front knives
21.6 in (550 mm)
Maximum opening of rear knives
23.6 in (600 mm)
Delimbing knives and feed rollers are separately controlled
Yes
Measuring and control automatics
Measuring device
PONSSE Opti4G
Equipment
Equipment

Plenty of optional equipment is available in addition to the comprehensive ponsse H5 standard equipment. Consult your nearest ponsse service center or dealer for more information on the standard and optional equipment.