Noticias

Navegación por categorías

Publicador de contenidos

angle-left Surface Disinfecting and Corona virus prevention inside Ponsse cabins
Volver a

Surface Disinfecting and Corona virus prevention inside Ponsse cabins

Dear PONSSE Customer,


We have been asked to provide instructions on how to disinfect cabins of PONSSE forest machines. We also comply with these instructions in our service businesses before we deliver maintained machines to our customers and before we deliver trade-in and new forest machines.

Coronavirus spreads through droplet transmission and remains infectious on different surfaces from a few hours up to several days. In the forest machine cabin, which may be accessed by more than one operator or service mechanic during a single day, the risk of spreading coronavirus is elevated. We can reduce this risk by following simple steps.

 

Equipment:
Primarily, a 70% ethanol/water mixture or other cleaning agent with an ethanol content of more than 60%, approved for cleaning and the disinfection of surfaces (an ethanol content of more than 60% is required to destroy the virus), should be used. If ethanol-based cleaning agents are not available, the secondary option is to use a hydrogen peroxide-containing (e.g. 0.5%) or chlorine-containing (e.g. sodium hypochlorite 0.1%) agent approved for cleaning and disinfection. Over long-term use, these cleaning agents may affect cabin surfaces.

You also need a refillable spray bottle, tissue paper and protective gloves.

 

How to disinfect the cabin:

  • Clean the cabin and put everything in their correct place to make disinfecting easier.
  • Use a water/ethanol mixture with an ethanol content of at least 70%.
  • Spray and dry armrests, levers and handles, and other contact surfaces. However, do not apply too much cleaning agent onto surfaces, as the ethanol mixture may react with rubber compounds, such as the floor mat and armrest cushions.
  • Spray and wipe all control buttons. Also remember the radio and heater clock.
  • Spray and wipe the computer, keyboard and mouse.
  • Spray and wipe all windows from the inside.
  • Spray and dry all handles both inside and outside the cabin.
  • Discard all used tissues and protective gloves.
  • Wash your hands!

 

Cleaning instructions for other work facilities, such as offices and service centres:

  • Facilities must always be cleaned starting from the cleanest area towards the dirtiest area.
  • All frequently touched surfaces (such as door handles, armrests, tables, light switches, faucet handles) must be cleaned thoroughly and frequently. Public areas, in which many people can touch different surfaces, must be cleaned several times a day. If possible, contact surfaces should be cleaned every two to four hours during the epidemic.
  • Public areas in workplaces must be cleaned using different equipment that is used in personnel facilities. 
  • A mildly alkaline universal cleaning agent should be used. In sanitary facilities, a disinfectant can also be used to produce a better cleaning result. 
  • When cleaning surfaces, protect your hands using gloves. After cleaning, wash the gloves thoroughly and dry them or replace them.  
  • Use, for example, leakproof disposable gloves.
  • Cleaning equipment must be cleaned thoroughly after cleaning. 
  • Place easily removable and leakproof bags into rubbish bins. Monitor all rubbish bins and do not allow them to be more than three-quarters full. Rubbish bins must be emptied every day, especially in public areas. Discard sealed rubbish bags as incinerated mixed waste. 
  • Wash your hands up to your elbows using water and soap. 

Vieremä, 27 March 2020
PONSSE PLC
FURTHER INFORMATION: PONSSE service

Dedicated to Cut-To-Length logging

Dedicado a la tala de corte a medida

Somos el mejor amigo de los forestales, ¡y por una muy buena razón! Nuestras innovadoras soluciones de tala que siguen los principios del desarrollo sostenible siempre se producen específicamente para cada cliente: nuestra misión es ayudar a mejorar el negocio de nuestros clientes al proporcionar productos y servicios confiables.

Nuestras actividades de I+D nunca se detienen, lo que garantiza que sigamos siendo el número uno. Ponsse diseña sus máquinas junto con sus usuarios. De esta manera, nuestros productos satisfacen las necesidades de cada cliente en todas las condiciones. Es por esto que los productos de Ponsse también se prueban constantemente. Queremos seguir ganándonos la confianza de nuestros clientes.

Ponsse se especializa en máquinas forestales de corte a medida y sus sistemas de información. También ofrecemos mantenimiento de alta calidad, piezas de repuesto y máquinas de intercambio, de manera segura y confiable. ¡Póngase en contacto con nosotros!:

Factory link

Fábrica
La fábrica de máquinas forestales más moderna del mundo

Subscribe newsletter

Frontpage youtube items

Somos la familia
Ponsse
Ponsse es una empresa familiar cuyas raíces se encuentran en las profundidades del campo finlandés.
Nos importa la
sustentabilidad
El método de corte a medida es un método de tala moderno y respetuoso con la naturaleza.
Tecnología de
punta
Las máquinas forestales de Ponsse le ofrecen las mejores herramientas para todas las especies de árbol y todos los entornos de tala.

Ponsse frontpage category list