• harvester-heads-header

PONSSE H8

This content requires HTML5 & Javascript or Adobe Flash Player Version 9 or higher.

Base machines: PONSSE Bear, PONSSE Ergo and track-based machines over 20 tons

庞赛 H8 是一款十分坚固有力的采伐机头,可用于高强度工作下对大型树木的采伐。 相对于它的尺寸, H8 拥有优越的性能。 其有力的给料和完美的几何结构能够支撑大树,保证了较高的生产率。

准确的自动控制系统能够保证切割精确度, 给料以最大速度将木材按所要求的长度进行切割。 在给料过程中会对给料速度进行控制, 减少给料辊对木头造成的伤害, 降低压力值, 提高机器效率。 打枝刀和给料辊的抓握压力会根据树的尺寸进行自由调节, 给料辊从底部夹住木头, 以保证在木材给料期间抓紧木头, 且使摩擦力达到最小。

庞赛 H8 采伐机头的锯切性能也非常出色。 自动性能操作简单, 它可根据树的直径控制锯切运动, 并保证快速切割。 这些性能在提高锯切效率的同时, 也延长了锯刀和锯链的使用寿命。 牢固平稳的倾斜运动加快了工作速度, 也减少了对采伐机头的压力。

庞赛 H8 采伐机头也适用于多木采伐, 打枝刀和给料辊的几何形状设计也使其能够对更大型树木进行抓集和造材。

Close

Technical details - PONSSE H8

Dimensions
Weight from (depending on the equipment)
from 1,250 kg (2,756 lbs) / H8 top saw from 1,450 kg (3,197 lbs)
Length
1,500 mm (59 in) / H8 top saw 1,730 mm (67 in)
Width
1,650 mm (65 in)
Height without rotator
1,680 mm (66 in) / H8 top saw 1,760 mm (69 in)
Feed roller
Feed system
3 rollers
Feed force
36 kN (8,093 lbf)
Feeding speed
5 m/s (16.4 ft/s)
Maximum opening
740 mm (29.2 in)
Declimbing unit
Number of knives
4+1+1
Maximum opening of front knives
740 mm (29.2 in)
Maximum opening of rear knives
780 mm (31 in)
Delimbing knives and feed rollers are separately controlled
Yes
Tracked carrier
Operating pressure
28-31 MPa
Carrier weight (min)
20-30 tons
Measuring and control automatics
Measuring device
PONSSE Opti control system
Equipment
Equipment

Plenty of optional equipment is available in addition to the comprehensive PONSSE H8 standard equipment. Consult your nearest Ponsse Service Center or dealer for more information on the standard and optional equipment.