• 2015-header

PONSSE Ergo

Ergo-6w-2015-main

采伐机头: H6, H7, H7euca, H77euca, H8
起重机:  C5, C44+

新型号系列的新 PONSSE Ergo 是一款人体工学设计的强大采伐机,适用于严苛的采伐条件和陡坡。新 Ergo 的框架、驾驶室、工作液压装置和传动系统都得到了全面升级。此外,起重机工作范围也进一步得到开发,以确保极端优秀的性能与可靠性。

Ergo 的新功能包括功能更强且维护方便的结构,提供了更强的牢度,加油与维护保养更快速更方便。EU Stage IV 发动机出色的性能与燃油效率,配合双回路液压装置和更快速的传动系统,进一步提升了动力系统的工作效率。此外,胜局后的传动系统提供了对地形的出色感知和对机器的掌控 - 尤其是在崎岖地形和陡坡上。Ergo 起重机可以选择 PONSSE C44+ 平行起重机或 PONSSE C5 滑动机臂型号。起重机底座的标准倾斜角度为 ±20º,让工作更加顺畅,即使在最陡峭的斜坡上也能保证起重机的动力。两个强大而精确的发动机控制旋转是两个起重机型号都具备的标准功能。

新驾驶室对驾驶员的舒适度有着直观的影响。更好的可见性、充足的存储空间以及更符合人体工学设计的控制让 PONSSE Ergo 驾驶室内的工作时间变得令人愉快。

Close

Technical details - PONSSE Ergo

Dimensions
Minimum weight
19 000 kg (41,887 lbs)
Typical weight
20 000 kg (44,092 lbs)
Length
8 020 mm (316 in)
Width
2 670–3 085 mm (105.1-121.7 in)
Ground clearance
600 mm (23.6 in)
Transportation height
3 800 / 3 970 mm (150.5 / 156.3 in)
Crane
C44+ C5
Slewing torque (gross)
PONSSE Beaver 40 kNm, PONSSE Fox 52 kNm, PONSSE Ergo 57 kNm 57 kNm
Crane tilt angle
PONSSE Fox ±15°, PONSSE Beaver -12 °/+18°, PONSSE Ergo ±20° ±20°
Crane turning angle
250° 250°
Lifting moment (gross)
PONSSE Beaver and Fox 230 kNm, PONSSE Ergo 250 kNm 248 kNm
Reach
PONSSE Fox:10-11 m (32.8-36 ft ) (H5, H6), PONSSE Beaver: 10-11 m (32.8-36 ft) (H5, H6), PONSSE Ergo: 8,6/10/11 m (28.2/32.8/36 ft ) (H5/H6/H7) 8.6/9.5/10 m (28/31/33 ft)
Engine
Model
MB OM936 LA EU Stage IV ( Europe), MB OM906 LA EU Stage IIIA (other countries)
Power
IV: 210 kW (286 hp), IIIA: 205 kW (275 hp)
Torque
IV: 1 150 Nm / 1 200-1 600 rpm, IIIA: 1 100 Nm / 1 200-1 500 rpm
Tractive force
160 kN (40,466 lbf)
Fuel tank volume
380 l (100 gal US)
Hydraulic system
Control system
PONSSE OptiControl
Hydraulic circuits
Separate hydraulics circuits for the harvester head and crane
Harvester head pump
190 cm3 (11.6 cu in)
Crane pump
145 cm3 (8.8 cu in)
Oil tank volume
290 l (63.8 gal UK)
Tyres
Front
600/65-, 710/55-34''
Rear
600/55-, 710/45-, 800/40-26,5''
Harvester head
H6 H7 H77euca H7euca H8
Weight from (depending on the equipment)
1,050 kg (2,315 lbs) excl. rotator 1,150 kg (2,535 lbs) excl. rotator 1,300 kg (2,866 lbs) excl. rotator from 1,200 kg (2,646 lbs) excl. rotator from 1,250 kg (2,756 lbs) / H8 top saw from 1,450 kg (3,197 lbs)
Feed system
3 rollers 3 rollers 2 rollers 3 feed rollers 3 rollers
Feed force
25 kN (5,620 lbs) 30 kN (6,744 lbs) 25/29 kN (5,620/6,520 lbf) 25 kN (5,620 lbs) 36 kN (8,093 lbf)
Maximum opening
600 mm (23.6 in) 650 mm (25.6 in) 600 mm (23.6 in) 630 mm (25.6 in) 740 mm (29.2 in)
Feeding speed
6 m/s (19.7 ft/s) 5 m/s (16.4 ft/s) 5,5-6 m/s (18.1–19.7 ft/s) 6 m/s (19.7 ft/s) 5 m/s (16.4 ft/s)
Equipment
Equipment

Plenty of optional equipment is available in addition to the comprehensive PONSSE Ergo standard equipment. Consult your nearest Ponsse Service Center or dealer for more information on the standard and optional equipment.