| Dimensions | |
| Weight in working condition (includes rotator and hanger) depending on equipment: | 850 - 900 kg (1870 -1980 lb) |
| Lenght: | 1, 350 mm (53 in) |
| Width: | 1, 230 mm (48 in) |
| Height without rotator: | 1, 150 mm (45 in) |
| Power | |
| Power consumption: | 70-90 kW (94-120 hp) |
| Operating pressure: | 20-24 MPa (2900-3480 lb/sq in) |
| Required oil flow: | 200 -250 l/min (53-66 gal/min) |
| Saw unit | |
| Hydraulic chain saw | |
| Power: | 45 kW (60 hp) |
| Saw blade length: | 640 mm (25 in) |
| Saw speed: | 44 m/s (144 ft/s) |
| Chain pitch: | 0.404 " |
| Cutting diameter, one pass | 520 mm (20,5 in) |
| Chain shot guard standard | |
| Feed unit | |
| Feed system: | 3 spike rollers or rubber-cushioned rollers |
| Gross feed force: | 18 kN (4050 lb) |
| Feed speed: | 0-4 m/s (0-13 ft/s) |
| Two stage grip pressure, standard | |
| Delimbing unit | |
| One stationary and four hydraulically movable knives. Chain shot shield as a standard | |
| Largest opening: | 500 mm (20 in) |
| Separately controlled delimbing knives and feed rollers | |
| Measuring and control automation | |
| P0NSSE Opti 4G | |
| Optional equipment | |
| Automatic PONSSE chain tensioner, also includes a manual tensioning screw | |
|
Color marking (hydraulic) | |
|
Stump treatment system (hydraulic) |
|
Floating tilt: as a standard the tilt works with on/off -controls so that when tilt is down the cylinder presses the harvester head down continuously. With a floating tilt the harvester head can be set to swing freely when in the down position. |
|
OptiOil (chain lubrication system controlled electronically through the Opti system) |
Home
Back
Print