• harvester-heads-header

PONSSE H6

This content requires HTML5 & Javascript or Adobe Flash Player Version 9 or higher.

Base machines: PONSSE Beaver, PONSSE Fox, PONSSE Ergo, PONSSE Ergo 8w, PONSSE Scorpion, PONSSE ScorpionKing and track-based machines over 15 tons

庞赛 H6 高效,经济和紧凑的尺寸使其成为市场上最通用的采伐机头。 庞赛H6具有多种用途,应用范围覆盖小径材的择伐和再生皆伐。

大径开口和精准控制使工作非常容易。 由于宽范围倾斜移动结合快速强有力的给料和锯切,使庞赛 H6 成为各种工作场地的可靠采伐机头。 庞赛 H6 短小强劲的结构,大型给料辊和优秀的打枝能力,以及打枝刀的低抓握磨擦力,也是保证在困难条件下能有高生产效率的特征。 庞赛H6也非常适合多株采伐,该种作业是基于对给料辊和标准打枝刀的控制。 当机头抓握树干时,给料辊将树干固定在机头内的位置,而打枝刀去抓握新的树干。 多株采伐可有效提高小径林地的采伐效率和结果。 多株采伐功能并不会削弱处理单棵树干时的效果。

 

Close

Technical details - PONSSE H6

Dimensions
Weight from (depending on the equipment)
1,050 kg (2,315 lbs) excl. rotator
Length
1,445 mm (57 in)
Width
1,500 mm (59 in)
Height without rotator
1,530 mm (60 in)
Feed roller
Feed system
3 rollers
Feed force
25 kN (5,620 lbs)
Feeding speed
6 m/s (19.7 ft/s)
Maximum opening
600 mm (23.6 in)
Declimbing unit
Number of knives
4+1+1
Maximum opening of front knives
640 mm (25.2 in)
Maximum opening of rear knives
650 mm (25.6 in)
Delimbing knives and feed rollers are separately controlled
Yes
Tracked carrier
Operating pressure
28 MPa (4,060 psi)
Carrier weight (min)
15-16 tons
Measuring and control automatics
Measuring device
PONSSE Opti4G
Equipment
Equipment

Plenty of optional equipment is available in addition to the comprehensive PONSSE H6 standard equipment. Consult your nearest Ponsse Service Center or dealer for more information on the standard and optional equipment.