| Dimensions | |
| Weight in working conditions (incl. rotator and hanger) depending on equipment: | 950 - 980 kg (2090 - 2156 lb) |
| Lenght: | 1, 420 mm (56 in) |
| Width: | 1, 530 mm (60.5 in) |
| Height without rotator: | 1, 420 mm (56 in) |
| Power | |
| Power consumption: | 70-90 kW (94-120 hp) |
| Operating pressure: | 20-24 MPa (2900-3480 lb/sq in) |
| Required oil flow: | 240 -300 l/min (64-80 gal/min) |
| Sawing unit | |
| Hydraulic chain saw | |
| Engine: | F11 - 19 or F12 - 30 |
| Power: | 45 kW (60 hp) |
| Saw blade length: | 750 mm (29.5 in) |
| Saw speed: | 44 m/s (144 ft/s) |
| Chain pitch: | 0.404 " |
| Cutting diameter, one pass: | 640 mm (25 in) |
| Chain shot quard standard | |
| Feed unit | |
| Feed system: | 2 spike, ribbed or padded rollers |
| Feed motors: | 2 x 630 cc or 2 x 470 cc |
| Gross feed force: | 24 kN (630) / 18 kN (470) 5400 lb (630) / 4050 lb (470) |
| Feed speed: | 5 m/s (630) / 6m/s (470) 17 ft/s (630) / 20.4 ft/s (470) |
| Two stage grip pressure: | standard |
| Delimbing unit | |
| 3-5 hydraulically movable knives, one stationary | |
| Largest opening: | 600 mm (23.5 in) |
| Separately controlled delimbing knives and feed rollers | |
| Measurement and control automation | |
| P0NSSE Opti 4G | |
| Optional equipment | |
| Automatic PONSSE chain tensioner, also includes a manual chain tensioning screw | |
| Colour marking (hydraulic) | |
| Stump handling (hydraulic) | |
| Floating tilt: As a standard the tilt works with on/off - controls so that when the tilt is down, the cylinder presses the harvester head down continuously. With a floating tilt the harvester head can be set to swing freely when in the down position. | |
| OptiOil (electronically-controlled chain lubrication system, controls in the Opti4G system) | |
| Optional knives (2 movable knives) | |
Home
Back
Print