| Dimensions | |
| Weight in working conditions (incl. rotator and hanger) depending on equipment: | 850-900 kg (1870-2090 lb) |
| Lenght: | 1, 420 mm (56 in) |
| Width: | 1, 100 mm (43.5 in) |
| Height without rotator: | 1, 400 mm (55 in) |
| Power | |
| Power consumption: | 70-90 kW (94-120 hp) |
| Operating pressure: | 20-24 MPa (2900-3480 lb/sq in) |
| Required oil flow: | 240 -300 l/min (64-80 gal/min) |
| Rotator | |
| Black Bruin MR10, Black Bruin BBR15 or Indexator AV12 | |
| Sawing unit | |
| Hydraulic chain saw | |
| Motor: | F11 - 19 or F12 - 30 |
| Power: | 45 kW (60 hp) |
| Saw blade length: | H60: 640/750 mm (25/29.5 in) |
| Saw speed: | 44 m/s (144 ft/s) |
| Chain pitch: | 0.404 " |
| Cutting diameter, one pass: | 520/640 mm (20/25 in) |
| Chain shot quard standard | |
| Feed unit | |
| Feed system: | 2 bogie roller assemblies with spike rollers or chain tracks |
| Gross feed force: | 24 kN (5400 lb) |
| Feed speed: | 0-5 m/s (0-17 ft/s) |
| Two stage grip pressure: | Optional equipment |
| Delimbing | |
| H60: | 2-4 hydraulically movable knives, one stationary |
| Largest opening: | 600 mm (23.5 in) |
| Separately controlled delimbing knives and feed rollers | |
| Measuring- and control automation | |
| PONSSE Opti 4G | |
| Optional Equipment | |
| Automatic PONSSE chain tensioner, also includes a manual chain tensioning screw | |
| Colour marking (hydraulic) | |
| Stump handling (hydraulic) | |
| Floating tilt: As a standard the tilt works with on/off - controls so that when the tilt is down, the cylinder presses the harvester head down continuously. With a floating tilt the harvester head can be set to swing freely when in the down position. | |
| OptiOil (electronically-controlled chain lubrication system, controls in the Opti4G system) | |
| Optional knives (2 movable knives) | |
Home
Back
Print